NAVIGATION SYSTEM (for HDD) Vehicle Position Mark is not Updated

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK VEHICLE SENSOR (OPERATION CHECK)


    1. A01NHA3

      Enter the "Vehicle Sensors" screen. Refer to Check GPS & Vehicle Sensors in Operation Check Click here.

    2. While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are almost equal.

      OK
      The readings are almost equal.

    NG

    CHECK DTC OUTPUT Click here

    OK

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here