NAVIGATION SYSTEM (for HDD) Panel Switches do not Function

INSPECTION PROCEDURE

Note

When replacing the display and navigation module display, perform vehicle contract setting (w/ G-BOOK system) Click here.

PROCEDURE


  1. CHECK PANEL SWITCH


    1. Check for foreign matter around the switches that might prevent operation.

      OK
      No foreign matter is found.

    NG

    REMOVE ANY FOREIGN MATTER FOUND

    OK

  2. CHECK PANEL SWITCH (OPERATION CHECK)


    1. A01NFP0E03
      Text in Illustration
      *1 Name of the pushed switch is displayed

      Enter the "Panel & Steering Switch Check Mode" screen. Refer to Check Panel & Steering Switch in Operation Check Click here.

    2. Operate the abnormal switch and check if the switch name is correctly displayed.

      OK
      The switch name is correctly displayed as operated.

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY Click here