NAVIGATION SYSTEM (for DVD) Switch Operation of Remote Touch not Accepted

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK START DIAGNOSTIC MODE


    1. Activate diagnostic mode and check if the "Service Menu" screen can be displayed Click here.

      OK
      Diagnostic mode can be activated..

    NG

    REMOTE TOUCH SELF CHECK (SWITCH OPERATION CHECK) Click here

    OK

  2. CHECK PANEL SWITCH (OPERATION CHECK)


    1. A01NFP0E03
      Text in Illustration
      *1 Push switch name

      Display the "Panel&Steering Switch Check Mode" screen Click here.

    2. Press each switch on the remote touch and check that the switch name is displayed on the screen.

      OK
      Pressing each switch displays its name on the screen.

    NG

    REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY Click here

    OK

  3. REMOTE TOUCH SELF CHECK (SWITCH OPERATION CHECK)


    1. Activate self check mode Click here.

    2. A01NHU9E06
      Text in Illustration
      *1 Switch Illumination
      *2 Switch Knob

      Check switch operation.


      1. Move the remote touch switch knob to the lower left.

      2. Check that the "MAP/VOICE" and "MENU" switches illuminate when each switch on the remote touch is pressed.

        Result
        Result Proceed to
        Self check mode cannot be activated. A
        Some switches do not turn on the "MAP/VOICE" and "MENU" switch illumination when they are pressed.
        All switches turn on the "MAP/ VOICE" and "MENU" switch illumination when they are pressed. B

    B

    REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY Click here

    A

  4. REPLACE INTEGRATION PANEL SUB-ASSEMBLY


    1. Replace the integration panel sub-assembly Click here.

    2. Check that each switch operation on the "remote switch" is accepted normally.

      OK
      Each switch operation is accepted normally.

    NG

    REPLACE REMOTE TOUCH (REMOTE OPERATION BOARD) Click here

    OK

    END