NAVIGATION SYSTEM (for DVD) Route cannot be Calculated

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK MAP DISC


    1. A01NEP6E12

      Check that the map disc is not deformed or cracked.

      OK
      No deformations or cracks on the map disc

    NG

    REPLACE MAP DISC

    OK

  2. CHECK CABIN


    1. Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.

      Tech Tips


      • A humid cabin and a rapid change in temperature may lead to condensation. Condensation in the cabin may cause a short circuit.

      • The navigation system may not operate normally when the temperature is -20°C (-4°F) or lower, or 65°C (149°F) or higher.

      OK
      Condensation is not likely being produced and the temperature is not high or extremely low.

    NG

    CABIN TO APPROPRIATE TEMPERATURE

    OK

  3. SET DESTINATION


    1. Set another destination and check if the system can calculate the route correctly.

      OK
      Route can be correctly calculated.

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    NORMAL OPERATION