NOISE FILTER INSPECTION


  1. INSPECT RADIO SETTING CONDENSER


    1. With the radio setting condenser installed, check that there is no looseness or other abnormalities.

    2. Remove the radio setting condenser.

    3. A01NE21E01
      Text in Illustration
      *1 Radio Setting Condenser

      Measure the resistance of the radio setting condenser according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (+B) - 2 (GND) Always 10 kΩ or higher
      2 (GND) - 3 Always Below 1 Ω