STEREO JACK ADAPTER ASSEMBLY INSTALLATION


  1. INSTALL VIDEO TERMINAL (w/ Rear Seat Entertainment System)


    1. A01NGU1

      Engage the 4 claws to install the video terminal.

  2. INSTALL HEADPHONE TERMINAL RH (w/ Rear Seat Entertainment System)


    1. A01NHBW

      Engage the 4 claws to install the headphone terminal RH.

    2. Engage the clamp.

  3. INSTALL HEADPHONE TERMINAL LH (w/ Rear Seat Entertainment System)


    1. A01NDMO

      Engage the 4 claws to install the headphone terminal LH.

    2. Engage the clamp.

  4. INSTALL STEREO JACK ADAPTER ASSEMBLY


    1. A01NHU2

      Connect the connector.

    2. Engage the 2 claws to install the stereo jack adapter assembly.

    3. A01NE43

      Engage the 2 clips and 2 guides to install the No. 1 side box panel.

    4. A01NHU6

      Install the 7 screws.

  5. INSTALL FRONT CONSOLE UPPER PANEL GARNISH


    1. A01NDI8

      Engage the 6 claws, 2 clips and 2 guides to install the front console upper panel garnish.

  6. INSTALL LOWER CONSOLE BOX POCKET


    1. A01NDYX

      Install the lower console box pocket as shown in the illustration.

  7. INSTALL CONSOLE COIN BOX


    1. A01NGRL

      Install the console coin box as shown in the illustration.

  8. INSTALL REAR CONSOLE BOX ASSEMBLY


    1. A01ND4Q

      Engage the 8 guides as shown in the illustration.

    2. A01NEDEE01
      Text in Illustration
      *1 Screw
      *2 Bolt

      Install the rear console box assembly with the 2 screws and 4 bolts.

    3. Connect each connector.

  9. INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY


    1. Connect the connector.

    2. A01NG12

      Engage the clip and guide.

    3. Install the multi-media interface ECU assembly with the 2 bolts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

  10. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY


    1. A01NGOF

      w/o Rear Seat Entertainment System:


      1. Engage the 4 claws and 6 clips to install the console rear end panel sub-assembly.

    2. w/ Rear Seat Entertainment System:


      1. Connect each connector.

      2. Engage the 4 claws and 6 clips to install the console rear end panel sub-assembly.

  11. INSTALL NO. 2 CONSOLE BOX DUCT


    1. A01NH7K

      Install the No. 2 console box duct with the 2 screws.

  12. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Engage the clamp.

    2. Connect each connector.

    3. A01NEE4

      Engage the 3 claws and 3 clips.

    4. w/o Seat Heater System:


      1. Connect the connector to the console box hole cover.

    5. A01NDQX

      w/ Seat Heater System:


      1. Engage the 4 claws to install the seat heater switch assembly.

      2. Connect the connector.

    6. A01NHPA

      Engage the 4 claws and 4 clips to install the upper console panel sub-assembly.

  13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01NH7J

      Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.