FRONT DOOR SPEAKER REMOVAL


  1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A01NCWL

      Using a moulding remover, disengage the 3 claws and remove the front door inside handle bezel plug as shown in the illustration.

  2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    1. A01NHP9

      Using a moulding remover, disengage the 2 clips and 5 claws as shown in the illustration.

    2. Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.

  3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)


    1. A01NFG7

      Using a moulding remover, disengage the 2 clips and 5 claws.

    2. Disconnect the connector and remove the power window regulator switch assembly with front door armrest base panel.

  4. REMOVE DOOR ARMREST COVER


    1. A01NHCO

      Remove the door armrest cover.

  5. REMOVE COURTESY LIGHT ASSEMBLY


    1. A01NHVPE01

      Using a screwdriver wrapped with protective tape, disengage the claw.

    2. Disconnect the connector and remove the courtesy light assembly.

  6. REMOVE NO. 1 FRONT DOOR STIFFENER CUSHION


    1. A01NCRL

      Remove the screw and No. 1 front door stiffener cushion.

  7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. A01NFFCE02

      Remove the 3 screws.

    2. Using a clip remover, disengage the 10 clips and front door trim board retainer.

      Text in Illustration
      *1 Front Door Trim Board Retainer
    3. A01NFAL

      Pull out the front door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.

    4. Raise the front door trim board sub-assembly to disengage the 4 claws and remove the front door trim board sub-assembly together with the front door inner glass weatherstrip.

    5. Disconnect each connector.

    6. A01NFHV

      Disconnect the front door lock remote control cable assembly and front door inside locking cable assembly.

    7. Remove the front door trim board retainer (green) from the front door trim board sub-assembly.

  8. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY


    1. A01NEQH

      Disconnect the connector.

    2. Remove the 2 screws.

    3. Disengage the clip and remove the front No. 3 speaker assembly.

  9. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY


    1. A01NGJ6

      Disconnect the connector.

    2. Remove the 4 screws and front No. 1 speaker assembly.

  10. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY


    1. A01NFKU

      Disengage the clamp.

    2. Remove the 2 screws and front No. 2 speaker assembly.