RADIO ANTENNA CORD REMOVAL


  1. REMOVE INSTRUMENT PANEL SAFETY PAD

    Tech Tips

    Refer to the procedure up to Remove Instrument Panel Safety Pad Assembly Click here.

  2. REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)


    1. Disengage the 6 clamps and remove the antenna cord sub-assembly.

      A01NDMP

  3. REMOVE ANTENNA CORD SUB-ASSEMBLY (for RHD)


    1. A01ND7Y

      Disengage the 5 clamps and remove the antenna cord sub-assembly.

  4. REMOVE ROOF HEADLINING ASSEMBLY

    Tech Tips

    Refer to the procedure up to Remove Roof Headlining Assembly Click here.

  5. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. Peel the strips of the tape used to secure the antenna cord only to the extent that allows removal of the antenna cord.

      A01NE59E01

    2. Remove the No. 2 antenna cord sub-assembly.

  6. REMOVE UPPER BACK WINDOW PANEL TRIM


    1. A01NGB3E01
      Text in Illustration
      *1 2-piece Type Clip

      Disengage the 7 clips and 6 claws, and remove the upper back window panel trim.

      Tech Tips

      If any clips remain on the back door panel after the upper back window panel trim is removed, remove the clips and install them to the upper back window panel trim.

  7. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY


    1. A01NEPA

      Disconnect the 2 connectors.

    2. Disengage the 4 clamps.

    3. A01NDC1E01
      Text in Illustration
      *1 Front

      Disengage the 3 clamps.

    4. A01NE0ZE01
      Text in Illustration
      *1 Clamp
      *2 Grommet

      Disconnect the connector.

    5. Disengage the clamp.

    6. Disconnect the grommet.

    7. Disengage the 2 claws and remove the No. 3 antenna cord sub-assembly.