INSPECTION PROCEDURE
PROCEDURE
CHECK WIRELESS HEADPHONE OPERATION
Check wireless headphone operation.
Check whether only one of the wireless headphones does not operate, or whether both wireless headphones do not operate.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here |
| A |
|
CHECK WIRELESS HEADPHONE BATTERY
Check that the dry-cell battery of the wireless headphone is not depleted.
| OK |
|---|
| Battery is not depleted. |
| NG |
|
REPLACE WIRELESS HEADPHONE BATTERY |
| OK |
|
CHECK WIRELESS HEADPHONE SETTING
Check the wireless headphone settings.
Check that the volume is not set to "0".
Check that "MUTE" is off.
| OK |
|---|
| The volume is not set to "0" and "MUTE" is off. |
| NG |
|
SET VOLUME TO HIGH AND TURN MUTE OFF |
| OK |
|
CLEAN INFRARED RAY RECEIVING PORTION
Clean the infrared ray receiving portion on the television display assembly.
Check whether the same malfunction occurs.
| OK |
|---|
| The function returns to normal. |
| NG |
|
REPLACE WIRELESS HEADPHONE Click here |
| OK |
|
END
REPLACE WIRELESS HEADPHONE
Replace the wireless headphone with a known good or new one and check if the same problem occurs again.
| OK |
|---|
| Same problem does not occur. |
| NG |
|
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here |
| OK |
|
END (WIRELESS HEADPHONE WAS DEFECTIVE)