REAR SEAT ENTERTAINMENT SYSTEM A Remote Control System does not Operate

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK REMOTE CONTROL SYSTEM


    1. Check remote control system operation.


      1. Check whether the remote control does not work for one of the television display assemblies, or does not work for both television display assemblies.

        Result
        Result Proceed to
        The remote control does not work for one of the television display assemblies. A
        The remote control does not work for both of the television display assemblies. B

    B

    CHECK SYSTEM Click here

    A

  2. CLEAN INFRARED RAY RECEIVING PORTION


    1. A01NE9Y

      Clean the infrared ray receiving portion on the television display assembly.

    2. Check whether the same malfunction occurs.

      OK
      The function returns to normal.

    NG

    REPLACE REMOTE CONTROL Click here

    OK

    END

  3. CHECK SYSTEM


    1. A01NGG3E02
      Text in Illustration
      *1 Television Display Assembly
      *2 Multi-display Assembly

      Check that the remote control operation of the rear system is not locked by the display and navigation module display.


      1. Check if "Rear System Locked" appears on the television display.

        OK
        The message does not appear.

        Tech Tips

        If the rear system is locked and the remote control is used in the rear seat area, a message indicating that the operation is not possible (for example, "Rear System Locked") is displayed. If the message is displayed, enter the multi-display assembly screen setting, and change the item that locks the rear seat entertainment system to Off.


    NG

    RELEASE LOCK

    OK

  4. CHECK REMOTE CONTROL BATTERY


    1. Check that the dry-cell battery of the remote control is not depleted.

      OK
      Battery is not depleted.

    NG

    REPLACE REMOTE CONTROL BATTERY

    OK

  5. REPLACE REMOTE CONTROL


    1. Replace the remote control with a new or known good one.

    2. Check that the remote control system operates normally.

      OK
      The remote control system operates normally.

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    END (REMOTE CONTROL WAS DEFECTIVE)