AUDIO AND VISUAL SYSTEM (w/o Navigation System) CD cannot be Inserted / Played or CD is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK IF A PROPER CD IS INSERTED


    1. Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      OK
      Normal CD

      Tech Tips


      • Translucent or uniquely-shaped CDs cannot be played.

      • CDs with adhesive paper labels should not be played.

      • Commercial audio CDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs, refer to the Owner's Manual.


    NG

    CHANGE DISC

    OK

  2. CHECK THAT CD IS INSERTED PROPERLY


    1. Check whether or not the CD is inserted upside down.

      OK
      CD is properly inserted.

    NG

    INSERT CD PROPERLY

    OK

  3. CLEAN CD AND RECHECK


    1. A01NF9N

      Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.

      OK
      Malfunction disappears.

      Note

      Do not use a conventional record cleaner or anti-static preservative.


    NG

    REPLACE CD AND RECHECK Click here

    OK

    END

  4. REPLACE CD AND RECHECK


    1. Replace the CD with a known good one and check that the malfunction disappears.

      OK
      Malfunction disappears.

    NG

    REPLACE RADIO RECEIVER ASSEMBLY Click here

    OK

    END