| DTC Code | DTC Name |
|---|---|
| CB-10 | System Microcomputer Malfunction |
| CB-11 | Media Interface Microcomputer Malfunction |
| CB-12 | CD-LSI Malfunction |
DESCRIPTION
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| CB-10 | System microcomputer malfunction |
|
| CB-11 | Media interface microcomputer malfunction | |
| CB-12 | CD-LSI (large scale integration) malfunction |
INSPECTION PROCEDURE
Tech Tips
After the inspection is completed, clear the DTCs.
PROCEDURE
REPLACE USB DEVICE OR "iPod"
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Turn the power switch off.
Tech Tips
When one of these DTCs has been stored, it is necessary to turn off the power switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the power switch on (ACC).
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
| NEXT |
|
CLEAR DTC
Clear the DTCs Click here.
| NEXT |
|
RECHECK FOR DTC
Recheck for DTCs and check if the same DTC occurs again.
Tech Tips
If DTCs are detected frequently, replace the multi-media interface ECU.
| OK |
|---|
| Malfunction disappears. |
| NG |
|
REPLACE MULTI-MEDIA INTERFACE ECU ASSY Click here |
| OK |
|
USB DEVICE OR "iPod" WAS DEFECTIVE