| DTC Code | DTC Name |
|---|---|
| CB-45 | USB Communication Error |
| CB-46 | iPod Control Error |
| CB-47 | iPod Communication Error |
DESCRIPTION
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| CB-45 | Communication error with USB device |
|
| CB-46 | "iPod" control software malfunction |
|
| CB-47 | Communication error with "iPod" |
INSPECTION PROCEDURE
Tech Tips
After the inspection is completed, clear the DTCs.
PROCEDURE
REPLACE USB DEVICE OR "iPod"
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Turn the power switch off.
Tech Tips
When one of these DTCs has been stored, it is necessary to turn off the power switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the power switch on (ACC).
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
Tech Tips
If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
| NEXT |
|
CLEAR DTC
Clear the DTCs Click here.
| NEXT |
|
RECHECK FOR DTC
Recheck for DTCs and check if the same DTC occurs again.
Tech Tips
If DTCs are detected frequently, replace the multi-media interface ECU.
| OK |
|---|
| Malfunction disappears. |
| NG |
|
REPLACE MULTI-MEDIA INTERFACE ECU Click here |
| OK |
|
USB DEVICE OR "iPod" WAS DEFECTIVE