WINDSHIELD DEICER SWITCH INSTALLATION


  1. INSTALL FRONT WIPER DEICER SWITCH


    1. A01NH6O

      Engage the 2 claws and install the fuel lid opener switch as shown in the illustration.

  2. INSTALL NO. 1 SWITCH HOLE BASE


    1. Connect each connector.

    2. A01NFF7

      Engage the 4 claws and 2 guides to install the No. 1 switch hole base.

  3. INSTALL INSTRUMENT PANEL GARNISH


    1. A01NH3A

      Engage the 6 clips to install the instrument panel garnish LH.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)

    Click here