WINDSHIELD DEICER SWITCH INSPECTION


  1. INSPECT FRONT WIPER DEICER SWITCH


    1. A01NHFIE04
      Text in Illustration
      *1

      Component without harness connected

      (Front Wiper Deicer Switch)

      Remove the front wiper deicer switch (See page

      Click here).

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      F5-1 (IG) - F5-5 (ECU) Front wiper deicer switch on Below 1 Ω
      F5-1 (IG) - F5-5 (ECU) Front wiper deicer switch off 10 kΩ or higher

      If the result is not as specified, replace the front wiper deicer switch.