CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY
Disconnect the F50 air conditioning amplifier assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
Tech Tips
Measure the values on the wire harness side with connector disconnected.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| F50-1 (IG+) - F50-14 (GND) | P - W-B | Power source (IG) | Power switch on (IG) | 11 to 14 V |
| F50-1 (IG+) - F50-14 (GND) | P - W-B | Power source (IG) | Power switch off | Below 1 V |
| F50-21 (B) - F50-14 (GND) | G - W-B | Auxiliary battery power supply | Power switch off | 11 to 14 V |
| F50-14 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
If the result is not as specified, there may be a malfunction in the wire harness.
Reconnect the F50 air conditioning amplifier assembly connector.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| F50-38 (DFG) - F50-14 (GND) | G - W-B | Rear window defogger signal | Power switch on (IG), rear window defogger switch off | 11 to 14 V |
| F50-38 (DFG) - F50-14 (GND) | G - W-B | Rear window defogger signal | Power switch on (IG), rear window defogger switch on | Below 1 V |
If the result is not as specified, the air conditioning amplifier assembly may have a malfunction.
CHECK RADIO RECEIVER ASSEMBLY
Disconnect the G8 radio receiver assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
Tech Tips
Measure the values on the wire harness side with connector disconnected.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G8-8 (+B) - G8-9 (GND) | SB - BR | Auxiliary battery power supply | Power switch off | 11 to 14 V |
| G8-16 (ACC) - G8-9 (GND) | GR - BR | ACC power supply | Power switch off | Below 1 V |
| G8-16 (ACC) - G8-9 (GND) | GR - BR | ACC power supply | Power switch on (ACC) | 11 to 14 V |
| G8-9 (GND) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
If the result is not as specified, there may be a malfunction in the wire harness.