SLIDING ROOF SYSTEM SYSTEM DESCRIPTION


  1. GENERAL

    This system has the following functions: manual slide open and close; auto slide open and close; manual tilt up and down; auto tilt up and down; jam protection; key off operation; key-linked open and close; and wireless transmitter-linked open and close.

  2. FUNCTION OF MAIN COMPONENT

    Component Outline
    Sliding roof ECU (Sliding roof drive gear sub-assembly) Sliding roof ECU (sliding roof drive gear sub-assembly) controls the rotational direction of the motor, which tilts or slides sliding roof glass.
    Sliding roof switch (Map light assembly) Sliding roof switch (map light assembly) outputs operation signals to sliding roof ECU (sliding roof drive gear sub-assembly).

  3. SYSTEM OPERATION

    The sliding roof has the following features.

    Function Outline
    Manual slide open and close This function causes sliding roof to open (or close) when SLIDE OPEN switch (or SLIDE CLOSE switch) is pressed for a maximum of 0.3 seconds. Sliding roof stops as soon as switch is released.
    Auto slide open and close This function causes sliding roof to fully open (or close) when SLIDE OPEN switch (or SLIDE CLOSE switch) is pressed for a minimum of 0.3 seconds.
    Manual tilt up and down This function causes sliding roof to tilt up (or tilt down) when TILT UP switch (or TILT DOWN switch ) is pressed for a maximum of 0.3 seconds. Sliding roof stops as soon as switch is released.
    Auto tilt up and down This function causes sliding roof to fully tilt up (or tilt down) when TILT UP switch (or TILT DOWN switch) is pressed for a minimum of 0.3 seconds.
    Jam protection The jam protection function automatically stops the sliding roof and moves it open half way (or fully tilt up) if a foreign object gets jammed in the sliding roof during close or tilt down operation.
    Key-off operation The key-off operation function makes it possible to operate the sliding roof for approximately 43 seconds after the power switch is turned on (ACC) or off, if the front doors are not opened.
    Key-linked open and close

    • When the key is not in the vehicle, the driver side door is unlocked, and the key in the driver side door is turned and held in the unlock direction for 1.5 seconds or more, the sliding roof ECU activates the sliding roof motor to open the sliding roof while the key is turned.

    • When the key is not in the vehicle, the driver side door is locked, and the key in the driver side door is turned and held in the lock direction for 1.5 seconds or more, the sliding roof ECU activates the sliding roof motor to close the sliding roof while the key is turned.

    Tech Tips

    This function is linked with the power window key-linked function.
    Wireless transmitter-linked open and close

    • When the main body ECU (multiplex network body ECU) receives an unlock signal from the electrical key transmitter continuously for longer than 2.5 seconds, the sliding roof ECU controls the sliding roof motor in accordance with the signal to open the sliding roof.

    • When the main body ECU (multiplex network body ECU) receives a lock signal from the electrical key transmitter continuously for longer than 2.5 seconds, the sliding roof ECU controls the sliding roof motor in accordance with the signal to close the sliding roof.

    Tech Tips

    This function is linked with the power window wireless transmitter-linked function.
    Sliding roof open warning When the power switch is turned from on (IG) to off and the driver door is opened with the sliding roof open, the buzzer in the combination meter assembly sounds once. Then, the warning message appears on the multi-information display.