REAR POWER WINDOW SWITCH INSPECTION


  1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for LH Side)


    1. A01NGV2E05
      Text in Illustration
      *1

      Component without harness connected

      (to Rear Power Window Regulator Switch Assembly (for Rear LH Side))

      Check the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        2 (UP) - 5 (GND) Auto up or up position Below 1 Ω
        4 (AUTO) - 5 (GND) Auto up or auto down position Below 1 Ω
        10 (DOWN) - 5 (GND) Auto down or down position Below 1 Ω
        2 (UP) - 5 (GND) Free 10 kΩ or higher
        4 (AUTO) - 5 (GND) Free 10 kΩ or higher
        10 (DOWN) - 5 (GND) Free 10 kΩ or higher

        If the result is not as specified, replace the rear power window regulator switch assembly (for rear LH side).

    2. A01NGV2E08
      Text in Illustration
      *1

      Component without harness connected

      (to Rear Power Window Regulator Switch Assembly (for Rear LH Side))

      Check that the LED illuminates.


      1. Apply battery voltage to the rear power window regulator switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 8 (LED)

        Battery negative (-) → 5 (GND)

        		 LED illuminates

        If the result is not as specified, replace the rear power window regulator switch assembly (for rear LH side).

  2. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for RH Side)


    1. A01NGV2E05
      Text in Illustration
      *1

      Component without harness connected

      (to Rear Power Window Regulator Switch Assembly (for Rear RH Side))

      Check that the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        2 (UP) - 5 (GND) Auto up or up position Below 1 Ω
        4 (AUTO) - 5 (GND) Auto up or auto down position Below 1 Ω
        10 (DOWN) - 5 (GND) Auto down or down position Below 1 Ω
        2 (UP) - 5 (GND) Free 10 kΩ or higher
        4 (AUTO) - 5 (GND) Free 10 kΩ or higher
        10 (DOWN) - 5 (GND) Free 10 kΩ or higher

        If the result is not as specified, replace the rear power window regulator switch assembly (for rear RH side).

    2. A01NGV2E08
      Text in Illustration
      *1

      Component without harness connected

      (to Rear Power Window Regulator Switch Assembly (for Rear RH Side))

      Check that the LED illuminates.


      1. Apply battery voltage to the rear power window regulator switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 8 (LED)

        Battery negative (-) → 5 (GND)

        		 LED illuminates

        If the result is not as specified, replace the rear power window regulator switch assembly (for rear RH side).