FRONT PASSENGER SIDE POWER WINDOW SWITCH INSPECTION


  1. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. A01NEJRE06
      Text in Illustration
      *1

      Component without harness connected

      (to Power Window Regulator Switch Assembly (for Front Passenger Side))

      Check the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        2 (UP) - 5 (GND) Auto up or up position Below 1 Ω
        4 (AUTO) - 5 (GND) Auto up or auto down position Below 1 Ω
        10 (DOWN) - 5 (GND) Auto down or down position Below 1 Ω
        2 (UP) - 5 (GND) Free 10 kΩ or higher
        4 (AUTO) - 5 (GND) Free 10 kΩ or higher
        10 (DOWN) - 5 (GND) Free 10 kΩ or higher

        If the result is not as specified, replace the power window regulator switch assembly (for front passenger side).

    2. A01NEJRE09
      Text in Illustration
      *1

      Component without harness connected

      (to Power Window Regulator Switch Assembly (for Front Passenger Side))

      Check that the LED illuminates.


      1. Apply battery voltage to the power window regulator switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 8 (LED)

        Battery negative (-) → 5 (GND)

        		 LED illuminates

        If the result is not as specified, replace the power window regulator switch assembly (for front passenger side).