All Power Windows do not Operate with Driver Side Door Key Cylinder or Wireless Transmitter

DESCRIPTION

When a key switch is pushed: 1) the door control receiver assembly receives the key signal; 2) the door control receiver assembly sends a signal to the certification ECU (smart key ECU assembly); 3) the main body ECU (multiplex network body ECU) sends the operation permission signal to the power window regulator motor assembly; and 4) the power window regulator motor assemblies are activated.
When the driver door key cylinder (key linked switch) is turned: 1) the door lock motor receives the signal; 2) the main body ECU (multiplex network body ECU) sends the signal to the power window regulator motor assembly; and 3) the power window regulator motor assemblies are activated.

INSPECTION PROCEDURE

Note

The power window control system uses a multiplex communication system (LIN communication system) and CAN communication system. Inspect the communication function by following How to Proceed with Troubleshooting Click here. Troubleshoot the power window control system after confirming that the communication system is functioning properly.

PROCEDURE

CHECK BASIC FUNCTION (WIRELESS AND POWER DOOR LOCK CONTROL SYSTEM)

Check that the wireless transmitter Click here and driver door key cylinder (key linked switch) Click here lock and unlock all the doors normally.

Result

Result	Proceed to
Transmitter and driver door key cylinder operate normally	A
Transmitter does not operate normally	B
Driver door key cylinder does not operate normally	C

B

GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (Proceed to Problem Symptoms Table) Click here

C

GO TO POWER DOOR LOCK CONTROL SYSTEM (Proceed to Problem Symptoms Table) Click here

A

CHECK MANUAL UP / DOWN FUNCTION
1. Check that the manual up and down function using the multiplex network master switch assembly and power window regulator switch assembly can operate all the power windows Click here.
  
  OK
  
  Manual up and down function is normal.
NG
GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) Click here

OK
CHECK REMOTE UP / DOWN FUNCTION
1. Check that the remote up and down function using the multiplex network master switch assembly operates the power windows Click here.
  
  OK
  
  Remote up and down function is normal.
NG
GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table) Click here

OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here

POWER WINDOW CONTROL SYSTEM All Power Windows do not Operate with Driver Side Door Key Cylinder or Wireless Transmitter