POWER WINDOW CONTROL SYSTEM Remote Up / Down Function does not Operate

DESCRIPTION

When the power switch is on (IG), the multiplex network master switch assembly sends remote up and down signals to each power window regulator motor assembly via the LIN communication line.

WIRING DIAGRAM

A01NE0HE14

INSPECTION PROCEDURE

Note

The power window control system uses a multiplex communication system (LIN communication system). Inspect the communication function by following How to Proceed with Troubleshooting Click here. Troubleshoot the power window control system after confirming that the communication system is functioning properly.

PROCEDURE


  1. READ VALUE USING INTELLIGENT TESTER (Main Body)


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Data List.

    5. Read the Data List according to the display on the intelligent tester.

      Main Body (Main Body ECU (Multiplex Network Body ECU))
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Communication P-Door Motor Connection status between power window regulator motor (for front passenger side) and main body ECU (multiplex network body ECU) / OK or STOP

      OK: Normal communication

      STOP: Communication stopped

      		 -
      Communication RL-Door Motor Connection status between power window regulator motor (for rear LH) and main body ECU (multiplex network body ECU) / OK or STOP

      OK: Normal communication

      STOP: Communication stopped

      		 -
      Communication RR-Door Motor Connection status between power window regulator motor (for rear RH) and main body ECU (multiplex network body ECU) / OK or STOP

      OK: Normal communication

      STOP: Communication stopped

      		 -
      Communication Master SW Connection status between multiplex network master switch assembly and main body ECU (multiplex network body ECU) / OK or STOP

      OK: Normal communication

      STOP: Communication stopped

      		 -
      OK
      On the intelligent tester screen, OK is displayed.

    NG

    GO TO LIN COMMUNICATION SYSTEM (Proceed to How to Proceed with Troubleshooting) Click here

    OK

  2. READ VALUE USING INTELLIGENT TESTER (Master Switch)


    1. Enter the following menus: Body / Master Switch / Data List.

    2. Read the Data List according to the display on the intelligent tester.

      Master Switch (Multiplex Network Master Switch Assembly)
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      P Door P/W Auto SW Front passenger side power window auto up and down switch signal / ON or OFF

      ON: Front passenger door power window auto switch operated

      OFF: Front passenger door power window auto switch not operated

      		 -
      RL Door P/W Auto SW Rear LH side power window auto up and down switch signal / ON or OFF

      ON: Rear LH power window auto switch operated

      OFF: Rear LH power window auto switch not operated

      		 -
      RR Door P/W Auto SW Rear RH side power window auto up and down switch signal / ON or OFF

      ON: Rear RH power window auto switch operated

      OFF: Rear RH power window auto switch not operated

      		 -
      P Door P/W Up SW Front passenger side power window manual up switch signal / ON or OFF

      ON: Front passenger door power window manual up switch operated

      OFF: Front passenger door power window manual up switch not operated

      		 -
      RL Door P/W up Switch Rear LH side power window manual up switch signal / ON or OFF

      ON: Rear LH power window manual up switch operated

      OFF: Rear LH power window manual up switch not operated

      		 -
      RR Door P/W up Switch Rear RH side power window manual up switch signal / ON or OFF

      ON: Rear RH power window manual up switch operated

      OFF: Rear RH power window manual up switch not operated

      		 -
      P Door P/W Down SW Front passenger side power window manual down switch signal / ON or OFF

      ON: Front passenger door power window manual down switch operated

      OFF: Front passenger door power window manual down switch not operated

      		 -
      RL Door P/W Down SW Rear LH side power window manual down switch signal / ON or OFF

      ON: Rear LH power window manual down switch operated

      OFF: Rear LH power window manual down switch not operated

      		 -
      RR Door P/W Down SW Rear RH side power window manual down switch signal / ON or OFF

      ON: Rear RH power window manual down switch operated

      OFF: Rear RH power window manual down switch not operated

      		 -
      Window Lock Switch Status Window lock switch signal / ON or OFF

      ON: Window lock switch LOCK position

      OFF: Window lock switch UNLOCK position

      		 -
      OK
      On the intelligent tester screen, ON or OFF is displayed accordingly.
      Result
      Result Proceed to
      NG A
      OK (Front passenger side power window remote up and down function does not operate) B
      OK (Rear LH side power window remote up and down function does not operate) C
      OK (Rear RH side power window remote up and down function does not operate) D

    B

    REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front Passenger Side) Click here

    C

    REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear LH Side) Click here

    D

    REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear RH Side) Click here

    A

    REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY Click here