POWER WINDOW MASTER SWITCH REMOVAL


  1. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. A01NHP9

      Using a moulding remover, disengage the 2 clips and 5 claws as shown in the illustration.

    2. Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.

  2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. A01NF5U

      Remove the 3 screws.

    2. A01NCRY

      Disengage the 4 claws and remove the multiplex network master switch assembly.