POWER WINDOW CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function(s) can be customized.

    • Be sure to make notes of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting / Power Window.

    5. Select the setting by referring to the table below.

      Power Window
      Tester Display Default Content Setting
      Door Key P/W Up ON This function is used to close the windows by operating the mechanical key. ON/OFF
      Door Key P/W Down ON This function is used to open the windows by operating the mechanical key. ON/OFF
      P/W Up w/ Transmitter OFF This function is used to close the windows using the wireless key transmitter. ON/OFF
      P/W Down w/ Transmitter OFF This function is used to open the windows using the wireless key transmitter. ON/OFF
      P Window Auto Up Avail This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger side). Avail/Not Avl
      P Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly. Avail/Not Avl
      RR Window Auto Up Avail This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear RH side). Avail/Not Avl
      RR Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear RH door window using the multiplex network master switch assembly. Avail/Not Avl
      RL Window Auto Up Avail This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear LH side). Avail/Not Avl
      RL Window Auto Up From Driver Avail This function is used to enable or disable the remote auto up function for the rear LH door window using the multiplex network master switch assembly. Avail/Not Avl
      Close All P/W Function ON This function is used to close the windows by suggest mode function. ON/OFF