CONDENSER REASSEMBLY


  1. INSTALL COOLER DRYER


    1. A01NDE6

      Using pliers, install a new cooler dryer to the modulator.

    2. A01NE7Z

      Sufficiently apply compressor oil to a new O-ring and the fitting surfaces of the cap.

      Compressor oil
      ND-OIL 11 or equivalent
    3. A01NGYOE01
      Text in Illustration
      *1 14 mm Straight Hexagon Wrench
      *2 Modulator

      Using a 14 mm straight hexagon wrench, install the cap to the cooler condenser core.

      Torque:
      2.9 N*m  { 30 kgf*cm, 26 in.*lbf }

      Note


      • Keep the O-rings and O-ring fitting surfaces clean from dirt or any foreign objects.

      • Do not use any compressor oil other than ND-OIL 11 or equivalent. If any compressor oil other than ND-OIL 11 or equivalent is used, compressor motor insulation performance may decrease, resulting in a leakage of electric power.

      • Keep the O-ring and O-ring fitting surfaces clean from dirt or any foreign objects.