AIR CONDITIONING SYSTEM, Diagnostic DTC:B1477/77

DTC Code DTC Name
B1477/77 A/C Inverter Low Voltage Power Resource System Malfunction

DESCRIPTION

The compressor with motor assembly monitors the controlling power voltage in the circuit. It stops the compressor circuit and outputs the DTC when the monitored voltage is outside the specified range.

The output DTC is memorized as previous trouble. The compressor control may not resume unless the power switch is turned off.

DTC No. DTC Detection Condition Trouble Area
B1477/77 An open or short to ground in the inverter controlling power voltage circuit.

  • Compressor with motor assembly

  • CAN communication system

INSPECTION PROCEDURE

CAUTION:


  • Wear electrically insulated gloves and pull out the service plug grip before inspection as procedures may require disconnecting high-voltage connectors. Be sure to carry the removed service plug grip because other workers may install it by mistake.

  • Do not touch the high-voltage connectors or terminals for 10 minutes after the service plug grip is removed.

Note

The hybrid control system and air conditioning system output DTCs separately. Inspect DTCs following the flow chart for the hybrid control system first if any DTCs from those systems are output simultaneously.

PROCEDURE


  1. CHECK CAN COMMUNICATION SYSTEM


    1. Using the intelligent tester to check if the CAN communication system is functioning normally.

      Result
      Result Proceed to
      CAN DTC is not output A
      CAN DTC is output B

    B

    GO TO CAN COMMUNICATION SYSTEM Click here

    A

    REPLACE COMPRESSOR WITH MOTOR ASSEMBLY Click here