AIR CONDITIONING SYSTEM, Diagnostic DTC:B1472/72

DTC Code DTC Name
B1472/72 A/C Inverter High Voltage Output System Malfunction

DESCRIPTION

The inverter in the compressor with motor assembly outputs high-voltage to operate the motor. If there is an open or short in the output circuit, the ECU will stop compressor operation and output the DTC. The output DTC will be memorized as a past DTC. The compressor operation remains stopped until both the past and present DTCs are cleared.

DTC No. DTC Detection Condition Trouble Area
B1472/72 Open or short in A/C inverter high voltage output system.

  • Compressor with motor assembly

  • CAN communication system

INSPECTION PROCEDURE

CAUTION:


  • Wear electrically insulated gloves and pull out the service plug grip before inspection as procedures may require disconnecting high-voltage connectors. Be sure to carry the removed service plug grip because other workers may install it by mistake.

  • Do not touch the high-voltage connectors or terminals for 10 minutes after the service plug grip is removed.

Note

The hybrid control system and air conditioning system output DTCs separately. Inspect DTCs following the flow chart for the hybrid control system first if any DTCs from those systems are output simultaneously.

PROCEDURE


  1. CHECK CAN COMMUNICATION SYSTEM


    1. Using the intelligent tester to check if the CAN communication system is functioning normally.

      Result
      Result Proceed to
      CAN DTC is not output A
      CAN DTC is output B

    B

    GO TO CAN COMMUNICATION SYSTEM Click here

    A

    REPLACE COMPRESSOR WITH MOTOR ASSEMBLY Click here