POWER BACK DOOR SYSTEM, Diagnostic DTC:B2222

DESCRIPTION

• A pulse sensor is built into the power back door ECU (power back door motor unit) to detect foreign objects and the back door position. The pulse sensor monitors the operating speed of the back door to detect foreign objects. The pulse sensor is also used to monitor the back door position. If a pulse signal that is out of the normal range is output, the power back door ECU (power back door motor unit) will store DTC B2222.

• If DTC B2222 is stored, the power back door system will be turned off and the back door will be switched to manual operation mode (not electrically controlled).

• In order to restore the power back door system to normal operation mode, first solve the problem indicated by DTC B2222 and then fully close the back door manually (reset operation).

  DTC No.	DTC Detection Condition	Trouble Area
  B2222	The power back door ECU (Power back door motor unit) does not operate.	Power back door ECU (Power back door motor unit)

INSPECTION PROCEDURE

PROCEDURE

1. CHECK FOR DTC

   
   

   1. Clear the DTCs Click here.

   2. Recheck for DTCs.

      OK
      DTC B2222 is not output.

   
   

   NG

   REPLACE POWER BACK DOOR ECU (POWER BACK DOOR MOTOR UNIT) Click here

   OK

   USE SIMULATION METHOD TO CHECK Click here