POWER BACK DOOR SYSTEM CUSTOMIZE PARAMETERS

Tech Tips

The following items can be customized.

Note


  • After confirming whether the items requested by the customer can be customized.

  • Be sure to record the current settings before customization.

  • When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the condition, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).


  1. CUSTOMIZE


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting / PSD&PBD operation.

    5. Select the setting by referring to the table below.

      PSD&PBD operation
      Tester Display Default Content Setting
      PBD SW Operation 0.8 s Function that turns the power back door closer switch on when a switch is pushed once or held down for 0.8 seconds. 0.8 s or ON
      PBD Buzzer*1 OFF Function that makes the power back door buzzer sound when the power back door is operating. OFF or ON
      Door Unlock with 1 Motion*2 ALL DOORS Function that selects the door or doors to unlock when the back door is locked and the transmitter switch is pushed to operate the power back door. Back Door or ALL DOORS
      One Motion

      (Not Use)*2, *4

      0.8 s*3

      		 Function that operates the power back door by pushing the transmitter switch when the back door is unlocked. OFF, 1 Op, 2 Op or 0.8 s
      One Motion with Unlock Door*2 0.8 s Function that operates the power back door by pushing the transmitter switch regardless of the door lock condition. OFF, 2 Op or 0.8 s
      PBD Assist Open Operation*5, 6 OFF Function that enables or disables the power back door assist open operation . When PBD Assist Open is set to on (enabled) the back door will open automatically when the back door opener switch assembly (opener switch) is operated. OFF or ON

      • *1: The warning buzzer that sounds when the power back door is operating cannot be customized (even if this function is set to "OFF", the buzzer will still sound).

      • *2: w/ Wireless one motion function

      • *3: w/o Wireless one motion function

      • *4: "Not Use" is not a setting that can be selected.

        Tech Tips

        When either "One Motion" or "One Motion with Unlock Door" is selected, the other will display "Not Use".

      • *5: The power back door assist operation will be linked with the "Back Door Opening Operation" setting of the entry and start system (for entry function) only when all doors are locked. If "Back Door Opening Operation" is set to "OFF", the power back door assist will not operate even if "PBD Assist Open Operation" is set to "ON" Click here.

      • *6: for models with the "PBD Assist Open Operation" customize setting item.