ELECTRONICALLY CONTROLLED BRAKE SYSTEM, Diagnostic DTC:C1440/98

DTC Code DTC Name
C1440/98 Unusual Bank Angle Detected

DESCRIPTION

If the skid control ECU determines that the vehicle is being driven at a steep bank angle, the skid control ECU stores DTC C1440/98 while VSC operation is temporarily disabled.

It is not a malfunction if the system and sensor circuits are normal and if the normal VSC operation resumes.

DTC Code INF Code DTC Detection Condition Trouble Area
C1440/98 630 Driving at a steep bank angle. Yaw rate and acceleration sensor

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK DTC


    1. Clear the DTCs Click here.

    2. Perform a road test.

    3. Check if the same DTC is recorded Click here.

      Result
      Result Proceed to
      DTC (C1440/98) is output A
      DTC (C1440/98) is not output B
      Yaw rate and acceleration sensor DTC is output C

    B

    END

    C

    REPAIR CIRCUITS INDICATED BY OUTPUT DTCS Click here

    A

  2. CLEAR DTC


    1. Clear the DTCs Click here.

      Tech Tips


      • If the skid control ECU determines that the vehicle is being driven at a steep bank angle, the skid control ECU stores DTC C1440/98 while VSC operation is temporarily disabled.

      • It is not a malfunction if the system and sensor circuits are normal and if the normal VSC operation resumes.


    NEXT

    END