DESCRIPTION
The skid control ECU communicates with the power management control ECU and controls braking force according to the motor's regenerative force.
The skid control ECU sends VSC signals to the power management control ECU and inputs operating signals from the power management control ECU.
The skid control ECU uses CAN communication for communication with the power management control ECU. If a communication malfunction is memorized, the skid control ECU prohibits VSC operation and a part of electronically controlled brake system control by fail-safe function.
| DTC Code | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1259/58 | - | Either of the following is detected:
|
Hybrid control system |
| C1310/51 | - | The traction control prohibition signal is received for at least 0.072 seconds when IG2 terminal voltage is 10.5 V or more for at least 1.5 seconds and communication with power management control ECU is valid. | Hybrid control system |
Tech Tips
This DTC will be output from the skid control ECU when the power management control ECU sends a malfunction signal to the skid control ECU.
INSPECTION PROCEDURE
PROCEDURE
CHECK HYBRID CONTROL SYSTEM
Check if the hybrid control system DTC is output Click here.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| B |
|
REPLACE POWER MANAGEMENT CONTROL ECU Click here |
| C |
|
INSPECT HYBRID CONTROL SYSTEM Click here |
| A |
|
REPLACE POWER MANAGEMENT CONTROL ECU Click here