FRONT ACTIVE STABILIZER CONTROL ACTUATOR REMOVAL


  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

    Tech Tips

    Refer to the procedure up to Remove Engine Assembly with Transaxle Click here.

  2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. A01NELV

      Remove the nut and separate the front stabilizer link assembly LH.

      Tech Tips

      If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.

  3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  4. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    1. A01NH7Q

      Remove the 2 bolts and front No. 1 stabilizer bracket LH from the front frame assembly.

  5. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as the LH side.

  6. REMOVE FRONT ACTIVE STABILIZER CONTROL ACTUATOR ASSEMBLY


    1. Remove the front active stabilizer control actuator assembly from the front frame assembly.

      Note


      • Take care not to damage the front active stabilizer control actuator assembly wire harness.

      • Avoid any impact to the front active stabilizer control actuator assembly.

      • Do not drop the active stabilizer control actuator assembly. If it is dropped, replace it with a new one.

  7. REMOVE FRONT NO. 2 STABILIZER BRACKET LH


    1. A01NHJB

      Remove the front No. 2 stabilizer bracket LH from the front No. 1 stabilizer bar bushing.

  8. REMOVE FRONT NO. 2 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as the LH side.

  9. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING


    1. Remove the 2 front No. 1 stabilizer bar bushings from the front active stabilizer control actuator assembly.