FRONT STABILIZER BAR INSTALLATION


  1. INSTALL FRONT NO. 1 STABILIZER BAR BUSHING


    1. A01ND5RE04
      Text in Illustration
      *1 Cutout
      *2 Front of the Vehicle
      *3 Inside of the Vehicle

      Install the 2 front No. 1 stabilizer bar bushings to the front stabilizer bar as shown in the illustration.

      Note

      When installing the front No. 1 stabilizer bar bushings, make sure that the cutout faces the rear of the vehicle.

  2. INSTALL FRONT NO. 2 STABILIZER BRACKET LH


    1. A01ND6C

      Install the front No. 2 stabilizer bracket LH to the front No. 1 stabilizer bar bushing.

  3. INSTALL FRONT NO. 2 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as the LH side.

  4. INSTALL FRONT STABILIZER BAR


    1. Install the front stabilizer bar to the front frame assembly.

  5. INSTALL FRONT NO. 1 STABILIZER BRACKET LH


    1. A01NEGE

      Install the front No. 1 stabilizer bracket LH to the front frame assembly with the 2 bolts.

      Torque:
      29 N*m  { 296 kgf*cm, 21 ft.*lbf }

  6. INSTALL FRONT NO. 1 STABILIZER BRACKET RH

    Tech Tips

    Perform the same procedure as the LH side.

  7. INSTALL FRONT STABILIZER LINK ASSEMBLY LH


    1. A01NELV

      Install the front stabilizer link assembly LH with the nut.

      Torque:
      74 N*m  { 755 kgf*cm, 55 ft.*lbf }

      Tech Tips

      If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.

  8. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as the LH side.

  9. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE

    Tech Tips

    Refer to the procedure from Install Engine Assembly with Transaxle Click here.