FRONT SHOCK ABSORBER (w/ Air Suspension) INSPECTION


  1. INSPECT FRONT PNEUMATIC WITH SHOCK ABSORBER CYLINDER ASSEMBLY


    1. Remove the front pneumatic cylinder inner cover Click here.

    2. A01NGOHE01
      Text in Illustration
      *1 Rolling Diaphragm

      Inspect front pneumatic with shock absorber cylinder assembly operation.


      1. Compress and expand the front pneumatic with shock absorber cylinder assembly 4 or more times.

      2. Fully extend the rolling diaphragm and check that the rolling diaphragm is not damaged or cracked.

        If damage or cracks exist, replace the front pneumatic with shock absorber cylinder assembly.

      3. Inspect the front pneumatic with shock absorber cylinder assembly.

        Note


        • Be sure not to cover the connection part for the No. 4 height control tube when compressing and expanding the front pneumatic with shock absorber cylinder assembly.

        • When disposing of the front pneumatic with shock absorber cylinder assembly, see Disposal Click here.

    3. Install the front pneumatic cylinder inner cover Click here.