HEIGHT CONTROL SWITCH (for Driver Seat) INSPECTION


  1. INSPECT HEIGHT CONTROL SWITCH


    1. A01NDY3E02
      Text in Illustration
      *1

      Component without harness connected

      (Height control switch)

      Measure the resistance according to the values in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (LSW) - 8 (IGH) Height control switch up side pressed 10 kΩ or higher
      Height control switch down side pressed Below 1 Ω
      Height control switch not pressed 10 kΩ or higher
      2 (HSW) - 8 (IGH) Height control switch up side pressed Below 1 Ω
      Height control switch down side pressed 10 kΩ or higher
      Height control switch not pressed 10 kΩ or higher

      If the value is not as specified, replace the height control switch.