ACTIVE STABILIZER SUSPENSION SYSTEM, Diagnostic DTC:C195A

DTC Code DTC Name
C195A Malfunction in Signal from Yaw Rate Sensor to Front Active Stabilizer Control ECU

DESCRIPTION

If the front active stabilizer control ECU receives a yaw rate sensor malfunction signal, DTC C195A is output. The yaw rate sensor is diagnosed by the skid control ECU. If yaw rate sensor related electronically controlled brake system DTCs are output, perform a diagnosis for those DTCs. If no yaw rate sensor related electronically controlled brake system DTCs are output, there may be a malfunction in the front active stabilizer control ECU.

DTC No. DTC Detection Condition Trouble Area
C195A Malfunction signal from yaw rate sensor is input to front active stabilizer control ECU

  • Yaw rate sensor

  • Front active stabilizer control ECU

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)


    1. Turn the power switch off.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the power switch on (READY) and the intelligent tester on.

    4. Check for DTC Click here.

      OK
      DTC is not output.

    NG

    GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) Click here

    OK

    REPLACE ACTIVE STABILIZER CONTROL ECU ASSEMBLY Click here