ACTIVE STABILIZER SUSPENSION SYSTEM PRECAUTION


  1. PRECAUTION FOR DISCONNECTING THE AUXILIARY BATTERY CABLE

    Note

    When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system after the cable is reconnected:

    System See Procedure
    Parking Assist Monitor System

    Click here

    Side Monitor System
    Back Door Closer System
    Power Back Door System

  2. PRECAUTIONS FOR TROUBLESHOOTING


    1. Before checking for DTCs, do not touch any parts or wiring. The malfunction may be resolved by touching parts or wiring, but confirmation of the exact malfunctioning area(s) may be difficult.

    2. When checking for DTCs, check the DTCs of all systems. This vehicle has a network that is used by the signals of each ECU, and the active stabilizer suspension system malfunction may be caused by malfunctions in other systems.

  3. NOTICES WHEN REPLACING ACTIVE STABILIZER CONTROL ACTUATOR ASSEMBLY


    1. As the active stabilizer control actuator assembly cannot be disassembled, replace it.