AIR SUSPENSION SYSTEM DIAGNOSIS SYSTEM


  1. DIAGNOSIS SYSTEM


    1. A01NDV5E01

      Indicator light


      1. When there is a problem with the air suspension system, "CHECK AIR SUSPENSION SYSTEM" is displayed on the multi-information display and the master warning light comes on.

    2. DTCs (Normal mode)


      1. DTCs are memorized in the suspension control ECU and read by using the intelligent tester. Refer to the DTC check procedure Click here.

    3. Test mode


      1. By switching from normal mode into test mode, you can inspect the height control switch and height control OFF switch circuits Click here.

  2. CHECK INDICATOR LIGHT


    1. A01NFERE01

      Turn the power switch on (IG).

    2. Check that the height control indicator light (N, HI, LO and Luggage mode) comes on for 2 seconds.

      If the indicator check result is not normal, proceed to troubleshooting for the indicator light circuit Click here.