FRONT DRIVE SHAFT ASSEMBLY INSPECTION


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. A01NCY9

      Check that there is no excessive play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no excessive play in the radial direction of the inboard joint.

    4. Check the boots for damage.

    5. A01NFHJE04

      Check whether the drive shaft dimensions are within the following specifications.

      Tech Tips

      The following table shows dimension (A) of the drive shaft.

      Distance
      Distance
      LH 593.4 mm (1.94 ft.)
      RH 934.7 mm (3.06 ft.)