HYBRID TRANSAXLE FLUID REPLACEMENT


  1. DRAIN HYBRID TRANSAXLE FLUID


    1. A01NH98E02
      Text in Illustration
      *1 Filler Plug
      *2 Drain Plug

      Using a hexagon socket wrench 10 mm, remove the filler plug and gasket.

    2. Using a hexagon socket wrench 10 mm, remove the drain plug and gasket.

    3. Using a hexagon socket wrench 10 mm, install the drain plug and a new gasket.

      Torque:
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }

  2. ADD HYBRID TRANSAXLE FLUID


    1. A01NDEME01

      Add transaxle fluid until the transaxle fluid level is between 0 and 5 mm (0 and 0.197 in.) from the bottom lip of the transaxle filler plug opening.

      Note


      • Stop the vehicle on a flat road.

      • Recheck the transaxle fluid level after driving when exchanging transaxle fluid.

      • Insufficient or excessive amounts of transaxle fluid may be the cause of some trouble.

      Capacity
      1.8 liters (1.9 US qts, 1.6 Imp. qts)

  3. INSPECT AND ADJUST HYBRID TRANSAXLE FLUID


    1. A01NDEME01

      Check that the transaxle fluid level is between 0 and 5 mm (0 and 0.197 in.) from the lowest position of the inner surface of the transaxle filler plug opening.

      Note


      • Stop the vehicle on a flat road.

      • Recheck the transaxle fluid level after driving when exchanging transaxle fluid.

      • Insufficient or excessive amounts of transaxle fluid may be the cause of some trouble.

      Capacity
      1.8 liters (1.9 US qts, 1.6 Imp. qts)

    2. Check for leaks if the quantity of transaxle fluid is low.

    3. Using a hexagon socket wrench 10 mm, install the filler plug and a new gasket.

      Torque:
      39 N*m  { 398 kgf*cm, 29 ft.*lbf }