HYBRID TRANSAXLE SYSTEM ON-VEHICLE INSPECTION


  1. INSPECT TRANSAXLE FLUID PRESSURE IN OIL PUMP

    Note

    Do the test at normal operating fluid temperature 50 to 80°C (122 to 176°F).


    1. Lift up the vehicle.

    2. A01NGUT

      Remove the fluid pump cover plug and O-ring.

    3. Install an oil pressure gauge with the adapter.

    4. Set the vehicle to FWD inspection mode Click here.

    5. Measure the fluid pressure.

      Fluid pressure
      9.8 kPa (0.1 kgf/cm2, 1.4 psi) or more

      Note

      Be sure to cancel the inspection mode immediately after the fluid pressure check is completed Click here.

    6. A01NDIB

      Install a new O-ring and the fluid pump cover plug.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }