DRIVING SUPPORT ECU INSTALLATION


  1. INSTALL DRIVING SUPPORT ECU


    1. A01NDIM

      Install the driving support ECU with the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note

      Do not install the driving support ECU if it has been damaged or impacted in any way.

    2. A01ND68

      Engage the clamp.

    3. Connect the connector.

  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Engage each clamp.

    2. Connect each connector.

    3. A01NCLN

      Engage the claw and 2 guides.

    4. A01NG9O

      Install the No. 1 instrument panel under cover sub- assembly with the 2 screws <D>.