HYBRID VEHICLE TRANSAXLE REMOVAL


  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

    Tech Tips

    Refer to the procedure up to Remove Engine Assembly with Transaxle Click here.

  2. REMOVE FRONT FRAME ASSEMBLY


    1. A01NE2D

      Disconnect the 2 clamps and engine wire from the front frame assembly.

    2. A01NFUZ

      Remove the bolt and HV transaxle mass damper.

    3. Remove the 2 nuts and separate the engine mounting insulators LH and RH.

    4. A01NE5M

      Remove the nut and separate the front engine mounting insulator.

    5. A01NDCA

      Remove the 2 bolts and separate the rear engine mounting insulator.

      Note

      Do not remove the rear engine mounting insulator assembly through bolts. Doing so makes it difficult to install the rear engine mounting insulator assembly.

    6. Remove the front frame assembly.

  3. REMOVE MANIFOLD STAY


    1. A01NCST

      Remove the bolt, nut and manifold stay.

  4. SEPARATE ENGINE WIRE


    1. Disconnect the 4 connectors and 8 wire harness clamps.

      A01NFS0

  5. REMOVE NO. 3 AUTOMATIC TRANSMISSION CASE COVER


    1. A01NCOI

      Remove the bolt and No. 3 transmission control cable bracket.

    2. A01NE13

      Remove the 2 bolts, clip and No. 3 automatic transmission case cover from the transaxle.

  6. REMOVE FRONT ENGINE MOUNTING BRACKET


    1. A01NEVK

      Remove the 3 bolts and front engine mounting bracket.

  7. REMOVE AUTOMATIC TRANSMISSION CASE COVER


    1. A01NER9

      Remove the 2 bolts and automatic transmission case cover.

  8. REMOVE HYBRID TRANSAXLE MASS DAMPER


    1. A01NGS8

      Remove the hybrid transaxle mass damper and gasket.

  9. REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY


    1. A01NDES

      Remove the 10 bolts.

    2. Separate and remove the hybrid vehicle transaxle assembly.

      Note

      Do not pry between the transaxle assembly and engine more than necessary to prevent the knock pins from being damaged.

  10. REMOVE NO. 2 TRANSMISSION CONTROL CABLE BRACKET


    1. A01NDAN

      Remove the bolt and No. 2 transmission control cable bracket.

  11. REMOVE WIRE HARNESS CLAMP BRACKET


    1. A01NGXU

      Remove the 2 bolts and 2 wire harness clamp brackets.

  12. REMOVE NO. 1 TRANSMISSION CONTROL CABLE BRACKET


    1. A01NH5A

      Remove the 2 bolts and No. 1 transmission control cable bracket.

  13. REMOVE OUTLET OIL COOLER TUBE SUB-ASSEMBLY


    1. A01NEEBE01
      Text in Illustration
      *1 Oil Cooler Tube Union
      *2 Outlet Oil Cooler Tube Sub-assembly
      *3 No. 1 Oil Cooler Tube Clamp
      *4 No. 2 Oil Cooler Tube Clamp

      Using a union nut wrench (17 mm), disconnect the outlet oil cooler tube sub-assembly.

    2. Remove the bolt, No. 2 oil cooler tube clamp and outlet oil cooler tube sub-assembly from the hybrid vehicle transaxle assembly.

    3. A01NFZD

      Remove the oil cooler tube union and gasket from the hybrid vehicle transaxle assembly.

    4. A01NFIT

      Remove the bolt and No. 1 oil cooler tube clamp from the hybrid vehicle transaxle assembly.