Constant speed control mode and vehicle-to-vehicle distance control mode:
| *1 | Multi-information Display |
| *2 | Master Warning Light |
| *3 | Cruise Main Indicator Light (Constant speed control mode) |
| *4 | Cruise Main Indicator Light (Vehicle-to-vehicle distance control mode) |
If the following conditions are detected while the dynamic radar cruise control system is operating, the system clears the stored vehicle speed in the ECM and cancels the dynamic radar cruise control operation.
Tech Tips
During constant speed control mode, the cruise main indicator light (constant speed control mode) flashes. During vehicle-to-vehicle distance control, the cruise main indicator light (vehicle-to-vehicle distance control mode) flashes.
| Vehicle Condition | Auto Cancel Condition | Fail-safe Deactivation Condition |
|---|---|---|
|
|
Turn cruise control main switch on again |
Vehicle-to-vehicle distance control mode:
| *1 | Multi-information Display |
| *2 | Master Warning Light |
| *3 | Cruise Main Indicator Light (Vehicle-to-vehicle distance control mode) |
If the following conditions are detected while the dynamic radar cruise control system is operating, the system clears the stored vehicle speed in the ECM and cancels the dynamic radar cruise control operation.
| Vehicle Condition | Auto Cancel Condition | Fail-safe Deactivation Condition |
|---|---|---|
|
|
Power switch on (IG) again |
Vehicle-to-vehicle distance control mode:
| *1 | Multi-information Display |
| *2 | Master Warning Light |
| *3 | Cruise Main Indicator Light (Vehicle-to-vehicle distance control mode) |
If the following conditions are detected while the dynamic radar cruise control system is operating, the system maintains the stored vehicle speed in the ECM and cancels the dynamic radar cruise control operation.
| Vehicle Condition | Auto Cancel Condition | Fail-safe Deactivation Condition |
|---|---|---|
|
There is dirt on millimeter wave radar sensor assembly | Recover from condition on left (RESUME operation is possible after recovery) |
|
|
|
Constant speed control mode and vehicle-to-vehicle distance control mode:
If the following conditions are detected while the dynamic radar cruise control system is operating, the system clears the stored vehicle speed and cancels the dynamic radar cruise control operation.
| Vehicle Condition | Auto Cancel Condition | Fail-safe Deactivation Condition |
|---|---|---|
| Cruise main indicator light goes off |
|
Push the cruise control main switch to + RES |