PCV VALVE INSTALLATION


  1. INSTALL VENTILATION VALVE SUB-ASSEMBLY


    1. A01NE52E07
      Text in Illustration
      *1 Adhesive 1324

      Apply adhesive to 2 or 3 threads of the ventilation valve sub-assembly.

      Adhesive
      Toyota genuine adhesive 1324, three bond 1324 or equivalent
    2. A01NGJ1

      Using a 19 mm deep socket wrench, install the ventilation valve sub-assembly.

      Torque:
      27 N*m  { 275 kgf*cm, 20 ft.*lbf }
    3. A01NGNV

      Connect the ventilation hose to the ventilation valve sub-assembly.

  2. INSTALL V-BANK COVER SUB-ASSEMBLY


    1. A01NEB5

      Fit the 4 retainers and install the V-bank cover sub-assembly.

  3. INSTALL COOL AIR INTAKE DUCT SEAL


    1. A01NDNO

      Install the cool air intake duct seal with the 6 clips.

  4. INSTALL ENGINE ROOM SIDE COVER


    1. A01NHKG

      Install the engine room side cover with the 4 clips.

  5. INSTALL ENGINE ROOM SIDE COVER LH


    1. A01NH7B

      Engage the guide.

    2. Install the engine room side cover LH with the 4 clips.