CANISTER REMOVAL


  1. PRECAUTION (w/ Navigation System for HDD)

    Note

    After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

    Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal
    Specification Waiting Time
    w/o Telematics transceiver 60 sec.
    w/ Telematics transceiver 120 sec.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT CENTER FLOOR COVER


    1. A01NGRZE01
      Text in Illustration
      *1 Bolt
      *2 Screw

      Remove the 7 bolts and 2 screws.

    2. Disconnect the 3 clips and remove the front center floor cover.

  4. REMOVE CHARCOAL CANISTER ASSEMBLY


    1. A01NDNPE01
      Text in Illustration
      *1 Retainer

      Push the retainer shown in the illustration and disconnect the vent line tube.

    2. Disconnect the purge line hose.

    3. Disconnect the air inlet line hose.

    4. Remove the 2 bolts and clip.

    5. A01NEOS

      Disconnect the 3 clamps.

    6. Remove the 2 bolts and charcoal canister assembly.