VACUUM SENSOR REMOVAL


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. Remove the windshield wiper motor and link assembly Click here.

  2. REMOVE FRONT SHOCK ABSORBER CAP LH (w/ Air Suspension)


    1. A01NHTO

      Remove the 3 nuts and front shock absorber cap.

  3. REMOVE FRONT SHOCK ABSORBER CAP RH (w/ Air Suspension)

    Tech Tips

    Use the same procedure for the LH side and RH side.

  4. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY


    1. A01NHCW

      Disconnect the connector (w/ Windshield Deicer).

    2. Disengage the grommet and clamp, and separate the wire harness.

    3. A01NFEQ

      Remove the 6 nuts, 4 bolts and outer cowl top panel sub-assembly.

  5. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR


    1. A01NE7W

      Disconnect the connector.

    2. Remove the 2 bolts and manifold absolute pressure sensor.