FUEL PUMP REMOVAL


  1. REMOVE FUEL TANK ASSEMBLY

    Tech Tips

    Click here

  2. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE


    1. A01NDYS

      Disconnect the fuel pump connector.

    2. A01NHMCE02
      Text in Illustration
      *1 Tube Joint Clip
      *2 Fuel Tube Joint
      *3 Nylon Tube
      *4 O-ring
      *5 Fuel Suction Plate

      Remove the tube joint clip and clamp, and pull out the fuel pump tube.

      Note


      • Check that there is no dirt or foreign matter around the fuel tube joint. After cleaning off any dirt, proceed with the work.

      • Be careful not to allow dirt or foreign matter to scratch or come into contact with the fuel tube connector and fuel suction plate that are sealed by O-rings.

      • Do not use any tools for this work.

      • Do not bend or twist the nylon tube by force.

      • Cover the disconnected fuel tube joint with a plastic bag.

      • When the fuel tube joint and fuel suction plate are stuck, pinch the fuel tank tube with your fingers, and turn it carefully to release. Disconnect the fuel tank tube.

    3. A01NE5W

      Remove the 8 bolts and fuel tank vent tube set plate.

    4. A01NEA2

      Pull out the fuel suction tube assembly with pump and gauge from the fuel tank.

      Note


      • Do not damage the fuel pump filter.

      • Be careful not to bend the arm of the sender gauge.

    5. Remove the gasket from the fuel suction tube assembly with pump and gauge.