FUEL PRESSURE REGULATOR REMOVAL


  1. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE


    1. Remove the fuel suction tube assembly with pump and gauge Click here.

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A01NHMHE01

      Disconnect the fuel sender gauge connector.

    2. Slide and remove the fuel sender gauge assembly.

  3. REMOVE NO. 2 FUEL SUCTION SUPPORT


    1. A01NHI8

      Using a screwdriver with its tip wrapped with tape, disengage the 4 snap claws through the claw holes, and remove the fuel suction support.

      Note

      Do not damage the fuel suction support.

  4. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY


    1. A01NE0T

      Remove the fuel pressure with jet pump regulator assembly from the fuel tank fuel filter.

    2. A01NF3DE02
      Text in Illustration
      *1 O-ring

      Remove the O-ring from the fuel pressure with jet pump regulator assembly.