FUEL PUMP RESISTOR INSTALLATION


  1. INSTALL FUEL PUMP RESISTOR

    A01NGT1

    1. Install the fuel pump resistor with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Install the earth cable with the bolt.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

    3. Connect the connector.

  2. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY

    Tech Tips



  3. INSTALL FRONT SHOCK ABSORBER CAP LH (w/ Air Suspension)


    1. A01NHTO

      Install the front shock absorber cap with the 3 nuts.

      Torque:
      14 N*m  { 143 kgf*cm, 10 ft.*lbf }

  4. INSTALL FRONT SHOCK ABSORBER CAP RH (w/ Air Suspension)

    Tech Tips

    Perform the same procedure as for the LH side.

  5. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Tech Tips

    Click here.