DRIVE BELT INSTALLATION


  1. INSTALL V-RIBBED BELT


    1. A01NE88E01
      Text in Illustration
      *1 Water Pump
      *2 Idler
      *3 Crankshaft

      Install the V-ribbed belt.

    2. A01NDRY

      Turn the V-ribbed belt tensioner counterclockwise and remove a 5 mm bi-hexagon wrench.

    3. After installing the V-ribbed belt, check that it fits properly in the ribbed grooves. Confirm that the belt has not slipped out of the grooves on the bottom of the crank pulley by hand.

  2. INSTALL FRONT FENDER APRON SEAL RH

  3. INSTALL FRONT FENDER LINER RH

  4. INSTALL FRONT WHEEL RH


    1. Install the front wheel RH.

      Torque:
      103 N*m  { 1050 kgf*cm, 76 ft.*lbf }